The H2500 equipment is mainly composed of an automatic oil feeder, a gas-hydraulic press and a mold. Centralized control of the whole machine, man-machine interface operation, error alarm, intelligent error checking.
The biggest advantage of this equipment: the machine is light and portable (applicable to high floors), low power consumption, low noise, and easy to operate. With a single forming mold, aluminum foil containers can be formed at one time.
Technical parameters and specifications
Material range
Aluminum foil 0.03-0.27mm
Feeding accuracy
Fixed length accuracy ±0.3mm
Electrical standards
Hydraulic System 5.5Kw
Driver Motor 0.75KW
Feeding Motor 110BYG3100A
Main PLC DELTA
Tension 0.5-50Kg.N
Power 3PHASE/380V/50Hz,PE Other specifications
Maximum width of substrate 500mm
Feeding speed (maximum) 50m/min
Main pressure 35Ton
Hydroulic Tank 500X500X400mm
Punching Speed 10-35Stroke/min
Working Plate 700X500mm
Working Plate Height From Ground 800mm
Stroke 120-240mm(Adjustment)
Mould Installation Height(max.) 450mm
Height Adjustment 50mm
Slide Connection M24x2
Length range 50-500mm
Maximum diameter of unwinding ф800mm
Dimension 1800X1100X1700mm
G.T 1300kg
SPECIAL CONFIGURATION: Gas-liquid cylinder system made in china.
Supporting facilities :
Air source – pressure 5~8Kg/cm2 with 0.8MM With air tank
