Product Features
The whole productionline includes: feeding machine,press machine,automatic stacker,scrap collector.
This equipment produces each kind of aluminum foil container’s special purpose equipment, is suitable for AL-foil thickness 0.035-0.28mm,Maxwidth of feeding is 550MM。
1. Electric power: 16kw (attached list)
2.production efficiency: 20-70Time/min; Rate of finished products:It is not lower than 98%
3. The oil on the face of AL-foil is professional stretch oil, may volatilize for the mixture.
4.Total gas-pressure meter:0.7kp~0.8kp; upper mould gas-pressure:0.4kp; down mould gas-pressure:0.2kp. Minute gas-pressure meter side-blown:0.3-0.65kp.
5.The function of the equipment:
| label | Power project | Power | Quality | single total Account |
| 1 | Mein motor | 5.5KW | 1 tower | 5.5KW |
| 2 | Lube oil pump motor | 120W | 1 tower | 120W |
| 3 | Roller motor with oil | 1.5W | 1 tower | 1.5KW |
| 4 | stepper motor | 200W | 1 tower | 200W |
| 6 | Waster collecter | 4KW | 1 tower | 4KW |
| 7 | hydraulic baling press | 4KW | 1 tower | 4KW |
| 8 | conveyer belt motor | 370W | 1 tower | 370W |
| 9 | magnetic powder brake | 200W | 2 | 400 |
| 10 | Staking motor | 200W | 3【or 2) | 600W (400WI |
| Total | 16.69KW |
Production Operation Requirement
| Power supply | The three phase voltage | The single phase voltage | Frequency range | Frequency range | Pressure |
| AC three-phase five-wire including neutral wire and ground wire | 380v (or 220v) | 220v | 50/60Hz | Below 50℃ | Consumption = 1m3/min, 0.6-1MPa |
Every Part Function Specification
1. Electric panel: Electric control assembly
2.Uncolier unit: oil AL-foil double-face,and than roll out.
3.Waster packing: packing the waster Aluminum foil
4.Stacking: automatic stacking the products
5. Press machine: press the host machine.
6.Scrap collecter; collect the waste AL-foil and send it to waster packing machine.
This equipment accept “independent operation, comprehensive management”concept to run every movement part. make each moving part is related but not interfere with each other, PLC for processing all the feedback information,greatly improving the equipment stability and the accuracy of the data.
Principle Of Mould Forming
Upper mould moving down to cutting male die, and cutting female die to cut the material, upper mould keep moving down, blank holder and cutting male die produce blank holder force in the action of below cylinder,and realize first level stretching in the action of upper mold core and below mold core. First level stretching female die continue to move, to realize the second level stretching with the second level stretching male die,ejector makes sign on products at the same time.Punch pressure pass the below deadpoint.blank holder and the first level female die to form a roll round space in the action of below cylinder,rolling products into round and continue go up, the below cylinder eject products out,and blow away from mould in the action of blower.