• The H2500 equipment is mainly composed of an automatic oil feeder, a gas-hydraulic press and a mold. Centralized control of the whole machine, man-machine interface operation, error alarm, intelligent error checking.
  • The biggest advantage of this equipment: the machine is light and portable (applicable to high floors), low power consumption, low noise, and easy to operate. With a single forming mold, aluminum foil containers can be formed at one time.

Technical parameters and specifications

  • Material range
  • Aluminum foil　　　　　 　　 0.03-0.27mm
  • Feeding accuracy
  • Fixed length accuracy　　　　±0.3mm
  • Electrical standards
  • Hydraulic System 5.5Kw
  • Driver Motor　　 0.75KW
  • Feeding Motor　　　 110BYG3100A
  • Main PLC　　 DELTA
  • Tension 　　 0.5-50Kg.N
  • Power 3PHASE/380V/50Hz,PE Other specifications
  • Maximum width of substrate 　　　　　500mm
  • Feeding speed (maximum) 　　　　　50m/min
  • Main pressure 35Ton
  • Hydroulic Tank 500X500X400mm
  • Punching Speed 　　　　 10-35Stroke/min
  • Working Plate 700X500mm
  • Working Plate Height From Ground 800mm
  • Stroke 120-240mm(Adjustment)
  • Mould Installation Height(max.) 450mm
  • Height Adjustment 50mm
  • Slide Connection M24x2
  • Length range 　　　　　　　 50-500mm
  • Maximum diameter of unwinding 　　 ф800mm
  • Dimension 1800X1100X1700mm
  • G.T 　　　　　　　　 1300kg
  • SPECIAL CONFIGURATION: Gas-liquid cylinder system made in china.

Supporting facilities :

  • Air source – pressure 5~8Kg/cm2 with 0.8MM With air tank